ไทย
Description
704-5 Multi stone-wood is SiO2 based micron scale coating which offers massive durability linked with strong graffiti and stain resistance. It can be applied to all stone and wood surfaces either in full strength or in diluted format, in 1, 2 or 3 coats by roller, brush or spray, depending on the level of protection required. To create a matt finish, wipe the surface with a microfiber or dry brush after application.
Properties
• Topographical coating
• Super durable
• Solvent based
• Easy-to-clean effect
• Highly resistant to staining from oil, wine, lemon juice
• Micron scale coating
• Ready-to-use liquid, no concentrate available
• The penetration of water, soot, coffee, cola, ketchup, red wine etc. is reduced
• The penetration of grill fat, fuel and waste oil and dry soil into the surface and can be very easily removed
• The curing process is at room temperature and it leads to a dust dry surface just in some few minutes
• Not soluble in water
• Can be applied by spray, brush, roller and dip or flow (not a wipe on buff off-coating)
• Resistant to heat and is non flammable when cured. On stone is still active after 1000°C
• Pre warming the surface prior to coating enhances bonding
• Curing time: Dust dry after a few minutes and stackable, fully bonded after 24 hours
Use on:
• Wood
• MDF
• Roof tiles (unglazed)
• Clinker
• Concrete (e.g. walls and facades)
• Plaster
Stone I Concrete I Wood :
• Bonds exceptional well on rough stones and concrete (needs a relatively rough surface to bond to. Not suitable for polished surfaces)
• Slightly breathable. Great performance against oil, water and domestic cleaning agents. Protects against red wine and lemon juice on marble when coated with a full layer. If a diluted layer is applied a slight belimish can occur from red wine after some hours
• Polished marble: It will adhere but if scratched hard it can be scratched off; however if the surfaces is abraded with 60-80 Grit abrasive before hand excellent bonding will be achieved
• Excellent resistance staining on all surfaces. Anti-Graffiti
MDF
(mixture of glue and wood particulates)
MDF is a highly versatile product but when water gets into the board it expands and the board breaks down and allows further water ingress.
The coating provides exceptional protection to MDF as when it is applied to the ” end grain/open edges” it prevents swelling and breakdown of the board. Ideal for kitchens and bathrooms where MDF often corrupts.
• Thin coating with 704-5: is rapidly absorbs into the MDF, not glossy. Allows for painting
• Thick coating: Becomes glossy
